46 Chapter 2 - Removal and replacement Q1342-90910
Output rollers
Face-down delivery assembly
1 Remove the following assemblies:
z Toner cartridge, media tray, and cable pod. See “Toner cartridge”
on page 15 through “Cable pod” on page 17.
z Left side, back, right side, and top covers. See “Left side cover”
on page 18 through “Top cover” on page 29.
z Fuser assembly. See “Fuser assembly” on page 42.
2 Remove two screws (callout 1) and lift the face-down delivery
assembly away from the fuser assembly.
Figure 35. Remove the output rollers
11
To Next Page
Loading...