Table 4-2 Control panel light message (continued)
Light status State of the printer Action
Attention: door open, media out, no print
cartridge, or media jam
This printer is in an error state that
requires operator intervention.
Check the following:
●
The print cartridge door is completely
closed.
●
Media is loaded. See
Loading media
into the input trays on page 24 for
instructions.
●
The print cartridge is correctly
installed in the printer. See
Changing
the print cartridge on page 51 for
instructions.
●
There is no media jam. See
Clearing
jams on page 68 for instructions.
Printer initialization
A printer initialization is taking place.
No action is necessary.
Fatal error
All lights are on.
Unplug the printer for 30 minutes, and
then plug the printer back in power outlet.
If the printer still has an error, contact
HP Support. See
Contact HP support
on page 55.
All lights are off. Make sure that there is power.
Unplug both ends of the power cord, and
then plug the power cord back into the
printer and the power outlet.
Return to Finding the solution on page 54.
ENWW Status light patterns 57
To Next Page
Loading...