Identifying the control-panel components
The printer control panel has three lights and two buttons. The HP LaserJet 1022nw has an additional
light (W
IRELESS
light) at the top of the control panel. These lights produce patterns that identify printer
status.
Figure 2-2 Control-panel lights and buttons
1 C
ANCEL
J
OB
button: When the printer is processing data, press the C
ANCEL
J
OB
button to cancel the print job.
2 G
O
button: To print a demo page or to continue printing while in manual feed mode, press and release the G
O
button. To
print a configuration page, press and hold the G
O
button for 5 seconds.
3 G
O
light: Indicates that the product is receiving data when flashing.
4 R
EADY
light: Indicates that the product is ready to print.
5 A
TTENTION
light: Indicates that the input tray is empty, print-cartridge door is open, print cartridge is missing, or other errors.
6 W
IRELESS
light: (HP LJ 1022nw printer only) When the wireless light is on solid, a wireless connection has been
established. When the wireless light is off, wireless operation is disabled. When the wireless light is flashing, the product
is trying to establish a wireless connection.
ENWW Identifying the control-panel components 15
To Next Page
Loading...