EN
Removal and Replacement
: Bottom assemblies
106
Formatter pan removal (continued)
Figure 4-45Removing the Formatter Pan (continued)
Note
Be careful not to damage or break the electronic cables and connections underneath
the formatter pan.
2
Slowly rotate the Formatter Pan away from the chassis.
3
Unplug the small connector cable and two flat flexible cables.
4
Slide the Formatter Pan free of the metal brackets.
5
To remove the Formatter from the Formatter Pan, remove the four screws
securing the Formatter.
Note
During reassembly, make sure the pan is re-seated in the brackets.
To Next Page
Loading...