EN
Product Operation
: Printer paper handling
34
Supported paper and envelope sizes
Scan:
Minimum 2 x 3.5 inches
Maximum 8.5 x 30 inches
Copy:
Letter, Legal, A4, Executive,
Envelopes - Commercial 10, Monarch, C5, DL, B5, no custom
Paper Input Sensor(s)
None
Paper size change
As with the printer, the scanner has to receive paper size information on a job-by-job
basis. There is an unchangeable default, but the scan width can be adjusted by the
job. The scan length is determined by the media. Quick Copy paper sizes are set from
the PC, except in an NVRAM initialization or initial power up when paper size is set to
a factory default NVRAM value. This value is the same as the printer factory default
paper size. If the media is larger than the Quick Copy page size or the print page size,
clipping might occur.
To Next Page
Loading...