ENWW Status light patterns 73
Return to Finding the solution
.
Printer initialization/Cancel
Job/Cleaning Mode
A printer initialization is taking
place. If all lights blink for 1/2 of
a second or longer in a
sequence:
● the printing is initializing
● all previously sent print jobs
are being purged
● a cleaning page is being
printed
No action is necessary.
Fatal error
All lights are on.
● Turn the printer off and then back on.
● Unplug the printer for 5 minutes, and then plug it back
in.
● If the printer still has an error, Contact HP support.
Accessory error
All lights are blinking.
● Remove the DIMMs and replace if necessary. See
Installing a memory DIMM (1300 series only)
for
instructions.
● Contact HP support.
Control panel light message (continued)
Light status Condition of the printer Action
To Next Page
Loading...