230 Chapter 7 Removal and Replacement C4170-90959
Fusing Assembly Ground Clip Replacement
1 Remove the following assemblies:
• Remove the fusing assembly. (See “Fusing Assembly Removal” (page 182) for
instructions.)
• Remove the engine controller assembly. (See “Engine Controller Assembly Removal”
(page 189) for instructions.)
2 Orient the ground clip as shown in figure 7-101, and then place it over the guide pins as
shown in figure 7-102.
Figure 7-101 Replacing the Fusing Assembly Ground Clip
Figure 7-102 Fusing Assembly Ground Clip
To Next Page
Loading...