98 Chapter 4 Problem Solving
EN
Personality/Job
Related Error
! Turn the printer off. Press and hold
the GO button. Turn the printer on
and continue to hold the GO button
for approximately five seconds, but
no longer than fifteen seconds. The
Attention light will come on during
this process. Release the Go
button. If both the Attention and
Ready lights came on before you
released the Go button, then you
must repeat the procedure.
! Remove or replace the language
DIMM.
! Contact your HP service
representative. See HP Customer
Care (Service and Support) or
Worldwide Sales and Service
Offices.
Buffer Flow ! The cable between the printer and
computer has a bad connection or
the cable is of poor quality. Check
the cable connections to see if they
are secure. Make sure you are using
a high-quality cable.
! Contact your HP service
representative. See HP Customer
Care (Service and Support) or
Worldwide Sales and Service
Offices.
General
Continuable Error
Contact your HP service representative.
See HP Customer Care (Service and
Support) or Worldwide Sales and
Service Offices.
Continuable Attention Errors (continued)
Type of Error Light Pattern Recommended Action
To Next Page
Loading...
