Receiving faxes to your computer
To receive faxes to your computer, you must turn on the receive-to-PC setting in the
software (see the device software Help). The receive-to-PC setting can be activated only
from one computer. If for any reason that computer is no longer available, you can use the
following procedure to turn the receive-to-PC setting off from the device control panel.
To turn off the receive-to-PC setting from the control panel
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Fax functions, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Stop Recv to PC, and then press
MENU
/
ENTER
to
confirm your selection.
After you select the Stop Recv to PC setting, any faxes that remain in the device
memory are printed.
Note
You cannot use the receive-to-PC feature if you are using Macintosh software, Windows 95,
or Windows NT.
40 Chapter 2 Faxing (basic) ENWW