Printing the fax activity log
The fax activity log provides a chronological history of the last 40 faxes that were received,
sent, or deleted, and any errors that occurred. A fax activity log includes the following
information:
● All faxes that have been received to the device
● All faxes that have been sent from the control panel
● All faxes that have been sent from the Toolbox and the fax software driver
● All faxes that have been sent from the HP Workplace (for Macintosh-compatible
computers that are directly connected to the device)
To print the fax activity log
Use the following steps to print a fax activity log:
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Reports, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Fax Activity log, and then press
MENU
/
ENTER
.
4. Press
MENU
/
ENTER
to select Print log now. The device exits the Menu settings and prints
the log.
To set the fax activity log to print automatically
You can decide whether or not you want the fax log to print automatically after every 40
entries. The factory-set default is On. Use the following steps to set the fax activity log to
print automatically:
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Reports, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Fax Activity log, and then press
MENU
/
ENTER
.
4. Press the > button once to select Auto Log Print, and then press
MENU
/
ENTER
.
5. Use the < or the > button to select On, and then press
MENU
/
ENTER
to confirm your
selection.
68 Chapter 4 Fax Logs and Reports ENWW
To Next Page
Loading...
