72 Chapter 4 - Faxing EN
9 Using the numeric keys, enter a name for the fax number. To do
so, repeatedly press the numeric key for the letter you need until
the letter appears. (See “Using dialing characters” on page 78 for
a list of characters.) For example, if the first letter you need is a
“C,” press 2 repeatedly until a
C appears. Press > to go to the
next space.
Note To insert punctuation, press * repeatedly until the character you want
appears and then press > to go to the next space. To delete a letter,
press > until you reach the space to the right of the letter, and then
press BACK SPACE.
10 Press E
NTER/MENU to save the information.
11 If you have more speed-dial codes or one-touch keys to program,
repeat steps 1 through 10.
To delete speed-dial codes and one-touch keys
1 Press ENTER/MENU.
2 Use the < or > key to select
FAX SETUP and then press ENTER/
M
ENU.
3 Press E
NTER/MENU to select SPEED DIALS.
4 Press E
NTER/MENU to select INDIVIDUAL SETUP.
5 Use the < or > key to select
DELETE INDIVIDUAL and then press
E
NTER/MENU.
6 Using the numeric keys, enter the number of the speed-dial code
you want to delete, and then press E
NTER/MENU.
7 Press E
NTER/MENU to confirm the deletion.
To Next Page
Loading...
