HP LaserJet 3200 - Changing how the product answers incoming faxes

90 Chapter 4 - Faxing EN
Changing how the product answers incoming
faxes
You set the answer mode when you set up the product. You will only
need to change these settings if you change what devices are
connected to this phone line.
To set the answer mode to automatic or manual
1 Press ENTER/MENU.
2 Use the < or > key to select
FAX SETUP and then press ENTER/
M
ENU.
3 Use the < or > key to select
FAX RECEIVE SETUP and then press
E
NTER/MENU.
4 Press E
NTER/MENU to select ANSWER MODE.
5 Use the < or > key to select
AUTOMATIC or MANUAL and then
press E
NTER/MENU to save your selection.