6-4 Removing and Replacing Parts
Table 6-1. Screws Used in the Printer
Drawing and Description Purpose
Threaded Phillips with captive star washer
Used to fasten metal to metal
when good electrical contact is
needed.
Silver Self-tapping Phillips screw
Used to fasten metal or plastic to
plastic mainframes.
Black Self-tapping Phillips screw
Used to fasten metal or plastic to
plastic mainframes.
Threaded Phillips screw with lock and flat washer
Used to fasten metal or plastic to
threaded plastic or metal.
For more information on the LaserJet 4000 / 4050 Visit www.PrinterSupplies.com 800-551-1943
To Next Page
Loading...