Q2431-90912 Chapter 6 Removing and replacing parts 217
1,500-sheet feeder rear cover
1. Locate the upper rear-cover locking tabs (callout 1) on each side of the rear cover (they are
marked with arrows; callout 2). Use a flat-blade screwdriver to release these tabs.
Figure 186. 1,500-sheet feeder rear cover (1 of 2)
2. Rotate the top of the cover away from the feeder. Lift up on the cover to release it.
Figure 187. 1,500-sheet feeder rear cover (2 of 2)
2
11
2
To Next Page
Loading...
