English
11 12
Install the control panel overlay (optional): 1) If necessary, remove the
overlay that is currently installed on the printer by inserting a thin, rigid
object such as a credit card under the top edge of the overlay and then
pulling up on the overlay until it comes off. 2) Place the overlay you want
onto the control panel and snap it into place.
Turn the printer power on. Turn the power switch to the on position (“|”)
and wait for the printer to warm up. If the printer automatically set your
language, go to step 14. If the printer did not set your language, go to step
13.
A!YZT[\]^_IJ`8%& ;1:d,9@@E
Ü/,OøopQ.ér-hV9FÑ̽ï
,'&<:,&é
9/KN
ab123LRÔÕVÔ¡N @`¢gEÏ£¤¥
(m¦K,§¨dV<U]¦K
,§¨dV<U
To Next Page
Loading...