1,500-sheet feeder lifter-drive assembly
1 Remove the following assemblies:
● Door. See
1,500-sheet feeder door.
● Rear and right-side covers. See
1,500-sheet feeder rear cover and 1,500-sheet feeder right-
side cover.
2 Unplug the lifter-drive harness connector from the PCA (location J1003; callout 1).
3 Unplug the lifter-drive sensor-harness from the sensor (callout 2) and remove the sensor harness
from the wire clip (callout 3).
2
3
1
Figure 6-128 1,500-sheet feeder lifter-drive assembly (1 of 4)
Accessories 297
To Next Page
Loading...