EN
Chapter 4: Problem Solving 77
The rear section of the duplexer:
6
From the rear of the printer, use the
handles on both sides of the
duplexer to slide out the rear section
until it stops.
7
Slowly pull any paper out of the
duplexer.
The duplexer’s top cover:
8
Open the duplexer’s top cover.
9
Slowly pull any paper out of the
duplexer.
When all paper has been removed from
the duplexer, continue with step 10
below:
10
Close the duplexer’s top cover, and
push the rear section of the duplexer
back into the printer. Open and
close the top cover to clear the
paper jam message.
Note
To prevent further jams, make sure all
tray covers are in place.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
