HP LaserJet 6P

Common PJL Commands
PJL Command Explanation
E
C
%-12345X@PJL Start PJL job.
@PJL SET SERVICEMODE=HPBOISEID Enter Service Mode
@PJL SET PAGES=0 Set page count [= xxxxx]
@PJL SET CRPAPER=LETTER Sets cold reset page size [= Letter/A4]
@PJL SET SKIPDEMO=FALSE Skips demo/PCL type page [= true/false]
@PJL SET DIAGNOSTICS=OFF Sets diagnostics [= OFF/ON] (for ISV use)
@PJL SET SERVICEMODE=EXIT Exits Service Mode
@PJL DEFAULT PAPER=LETTER Selects user paper size default
@PJL RESET Performs PJL reset
E
C
%-12345X Exits PJL mode
E
C
z Prints Self-Test page
E
C
E Resets the printer.
Other PJL Command examples:
@PJL INITIALIZE Sets user environment to factory defaults.
@PJL SET ECONOMODE=ON Sets Economode
@PJL SET PAGEPROTECT=LEGAL Sets the memory size for page protection to LEGAL
paper size.
@PJL SET MANUALFEED=ON Sets manual feed mode.
@PJL SET LANG =
FRENCH, GERMAN... Sets the default display language
1
1
Do not confuse this command with @PJL ENTER LANGUAGE, which sets
the printer language to PCL or PostScript.
HP LaserJet 5P/5MP, 6P/6MP Printer Service Supplement
Service Mode, PJL Defaults
33