Troubleshooting
The troubleshooting process for the HP LaserJet 5P/5MP and
6P/6MP printers has two key differences from the 4L/4ML printer:
• Different error light patterns (5 LEDs instead of 4).
• Infrared port troubleshooting.
This section provides a list and explanation of the error LED
patterns and instructions on troubleshooting the infrared port
A data error has occurred. Press the
[GO]
button to
continue printing (some data may be lost). For more
information, see “Data Error Light Patterns,” later in this
appendix.
A SIMM error has occurred. Make sure your SIMM is
installed correctly. Replace the SIMM that caused the
error. Or press the
[GO]
button on the printer to continue
without configuring the SIMM that caused the error. If the
SIMM has more than one bank of memory, the good
banks will be automatically configured.
HP LaserJet 5P/5MP, 6P/6MP Printer Service Supplement
Troubleshooting
60
To Next Page
Loading...