ENWW Connect printer cables 17
English
Connecting to Ethernet 10/100TX network (for the HP LaserJet
9040n/9050n and the HP LaserJet 9040dn/9050dn)
Use the RJ-45 connector if you want to connect the printer to an Ethernet 10/100TX network.
To connect to Ethernet 10/100TX network
1 Make sure that the printer power cord is not connected to an outlet.
2 Connect a network cable to the embedded HP Jetdirect print server
that is installed in the printer.
3 Connect the other end of the cable to the network port.
2
3
To Next Page
Loading...