46 Chapter 2 Printing tasks ENWW
6 Adjust the left (Y) paper guide by pressing the tab on the guide and sliding the guide until it
gently touches the paper.
7 Adjust the front (X) paper guide by pressing the tab on the guide and sliding the guide until it
gently touches the paper.
8 Note the orientation of the paper, as well as the value of the X dimension and the Y
dimension. The X and Y dimensions are marked in the tray. You will need this information for
a later step.
Note When loading Tray 4, make sure that the paper guide lock is in the up position.
9 Close the tray.
To Next Page
Loading...