HP LaserJet 9050 - Page 53

ENWW Orienting media 51
Other standard sizes
and custom sizes
(weights up to
199 g/m
2
)
(53 lb bond)
2, 3, or 4 No* Short edge toward feed direction; side to be
printed on facing down.
Other standard sizes
and custom sizes
(weights up to
216 g/m
2
)
(58 lb bond)
NOTE
For better duplexing
performance, set the
size and type for
Tray 1.
1 Yes Short edge toward feed direction; first side
to be printed on facing down.
Other standard sizes
and custom sizes
(weights up to
199 g/m
2
)
(53 lb bond)
2, 3, or 4 Yes Short edge toward feed direction; first side
to be printed on facing up.
Type of media Tray Duplexed Media Orientation
* When Alternate Letterhead mode is enabled and media type Letterhead or Preprinted is
selected, you must orient the media for two-sided (duplex) printing. For more information,
see Alternate Letterhead mode.