3. Load plain letter or A4 paper when you are prompted.
4.
Press
(Select) again to confirm and begin the cleaning process.
A page feeds through the printer slowly. Discard the page when the process is completed.
Calibrating the printer
Calibrations are performed at regular intervals. For best print quality, a calibration can be performed
from the control panel using the following steps:
1.
Use the
(Left arrow) or the (Right arrow) button to select System setup and then press
(Select).
2.
Use the
(Left arrow) or the (Right arrow) button to select Print quality and then press
(Select). Calibrate color will display on the control panel.
3.
Press
(Select).
4.
Use the
(Left arrow) or the
(Right arrow) button to select Calibrate now and then press
(Select).
5.
Press
(Select) to start the calibration.
96 Chapter 8 Problem solving ENWW
To Next Page
Loading...
