2. Feed print media into Tray 1 with the side to be printed down, and the top, short edge in first. Make
sure that the media is inserted far enough into the printer for the paper feed mechanism to grab
the media.
NOTE If you are printing on both sides, see Printing on both sides for loading instructions.
Loading Tray 2 or optional Tray 3
Tray 2 and optional Tray 3 are accessed from the front of the printer and hold up to 250 sheets of paper.
Tray 2 also supports other media such as envelopes, postcards, transparencies, HP LaserJet glossy
paper, and HP LaserJet Photo paper.
CAUTION Do not fan paper before loading it into trays. Avoid overloading trays.
CAUTION Avoid reusing paper that has been stapled. Staples left in reused paper will cause
printer damage that will require repairs that may not be covered under the warranty.
To load Tray 2 or optional Tray 3
NOTE Instructions are the same for loading media in Tray 2 and optional Tray 3.
1. Pull Tray 2 or optional Tray 3 out of the printer and remove any paper.
ENWW Loading trays 25
To Next Page
Loading...
