Printing on special media
If printing on a special type of media, printing speeds might be automatically reduced to improve the
output quality for that specific media.
Use these guidelines when printing on special types of media.
Printing on envelopes
Use only envelopes that are recommended for laser printers. See Print-media specifications for more
information.
●
Load a single envelope into Tray 1 or up to ten envelopes in Tray 2.
●
Do not load more than ten envelopes into Tray 2.
●
The weight of the envelope paper should not exceed 90 g/m
2
(24 lb).
●
Make sure that envelopes are not damaged and are not stuck together.
●
Never use envelopes that have clasps, snaps, windows, coated linings, self-stick adhesives, or
other synthetic materials.
●
If you are using a non-standard size of envelope, select the appropriate envelope as the Type. For
more information, see
Printing on custom-sized print media or cardstock.
CAUTION Failure to follow the guidelines above can result in jams.
For more information, see Print-media specifications.
To print on envelopes from Tray 1
1. Adjust the side-width guides.
28 Chapter 3 Printing tasks ENWW
To Next Page
Loading...
