Printing on both sides
To print on both sides of the paper, you must send the paper through the device twice.
CAUTION Do not print on both sides of labels or transparencies.
Print on both sides of the paper
1. Insert enough paper into Tray 2 or optional Tray 3 to accommodate the print job.
NOTE In Windows, Print on both sides (manually) must be enabled to complete these
instructions. To enable duplexing, in the printer driver, select Properties, and then click on
the Configure tab. Under Paper handling, select Allow Manual Duplexing, and then click
OK to save.
2. Use the following procedure to configure the printer to print on both sides (manually).
●
Windows: In the printer driver, select the Finishing tab, select the Print on both sides
(manually) option, and then send the job to print.
ENWW Printing on both sides 41
To Next Page
Loading...
