Trapping reduces the effect of color-plane misregistration by slightly overlapping the edges of adjacent
objects. The following levels of edge control are available:
●
Off sets Trapping and Adaptive Halftoning to Off.
●
Normal provides the default trapping settings. Adaptive Halftoning is set to On.
●
Maximum provides the most trapping. Adaptive Halftoning is set to On.
RGB Color
The RGB Color option determines how colors are rendered.
●
Default interprets RGB color as sRGB, which is the accepted standard for many software
companies and organizations, such as Microsoft and the World Wide Web Consortium. (See
http://www.w3.org.)
●
Device sets the printer to print RGB data in raw device mode. To render photographs properly
when this option is selected, you must manage color in the program in which you are working or
in the operating system.
●
Vivid instructs the printer to increase the color saturation in the midtones. Less colorful objects are
rendered more colorfully. This value is recommended for printing business graphics.
●
Photo Image interprets the RGB color as if it were printed as a photograph using a digital mini-
lab. It is designed to render the deeper, more saturated colors differently than Default mode. Use
this setting for printing photos.
Neutral Grays
The Neutral Grays setting determines the method for creating gray colors that are used in text, graphics,
and photographs.
●
Black Only generates neutral colors (grays and black) by using only black toner. This option
guarantees that neutral colors do not have a color cast.
●
4-Color generates neutral colors by combining all four colors of toner. This option produces
smoother gradients and transitions to non-neutral colors. It also produces the darkest possible
black.
ENWW Managing color options 49
To Next Page
Loading...
