7. Firmly close the front door.
After a short time, the control panel should display Ready.
NOTE If a cartridge is in the wrong slot or is the wrong type for the printer, the control panel
will display one of the following messages: Incorrect yellow, Incorrect magenta, Incorrect
cyan, Incorrect black.
8. Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived.
See the enclosed recycling guide for recycling instructions.
9. If you are using a non-HP print cartridge, check the printer control panel for further instructions.
For additional help, go to
http://www.hp.com/support/clj1600.
NOTE When replacing or changing a black print cartridge, a cleaning page will automatically
be printed. This helps prevent speckles on the front or back of printed documents. For a more
thorough cleaning, see
To clean the fuser using HP Toolbox.
58 Chapter 5 How do I? ENWW
To Next Page
Loading...
