CAUTION
To avoid damaging the printer, use only labels that are recommended for laser printers. To
prevent serious jams, always use tray 1 to print on labels and always use the straight-
through paper path. Never print on the same sheet of labels more than once or print on a
partial sheet of labels.
● Avoid labels that are separating from the backing sheet or are wrinkled or damaged in
any way.
● Place labels only in tray 1 with the side to be printed on facing up and the top, short
edge in first.
● Select Labels as the Type (Windows) or the Paper Source (Macintosh) from the Print
dialog box or the printer driver.
● Remove label sheets as they print from the straight-through paper path to prevent them
from sticking together.
● If a sheet of labels jams in the printer, see
Clearing jams.
Printing on transparencies
The printer supports printing on color transparencies. See Transparencies for more details.
44 Chapter 3 Printing tasks ENWW
To Next Page
Loading...
