2. Move the rear guides to match the size of paper that you are loading. Tray 2 and
optional Tray 3 accept several standard paper sizes.
3. If printing paper longer than Letter/A4, extend the rear of the tray until it matches the
size you are loading.
4. Slide the media-width guides slightly wider than the print media.
5. Load the paper. If this is special paper such as letterhead, load it with the side to be
printed on facing up and the top edge toward the front of the tray.
NOTE
If you print using the Print on Both Sides (manually) feature, see Printing on both sides for
loading instructions.
42 Chapter 4 Printing tasks ENWW
To Next Page
Loading...
