The Type is: drop-down menu shows all of the media types that the printer supports. For more
information about the Type is: drop-down menu settings, see the description for Type is: in the
Type
is section of this chapter.
NOTE You must use the same size of media for the entire print job. All Use Different Paper/
Covers options use the last Size is: setting that you select in any one of the Use Different Paper/
Covers options.
When you change the type and source of the media and covers, the settings that you select
remain configured until you close the software program.
Other Pages
Use the Other Pages options to select an alternative media type or source for the other pages of the
document. The following figure shows the appearance of the Paper Options group box when you select
the Use Different Paper/Covers check box.
Figure 4-8 Other Pages options
The following are the Other Pages options:
●
Size is: drop-down menu
●
Source is: drop-down menu
●
Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes made to the Size
is: setting here override any previous Size is: settings made in other Use Different Paper/Covers
options.
The Source is: setting specifies the source tray to use for printing a document. The list of source trays
depends on the printer accessories. Any optional media trays that are installed through the Device
Settings tab also appear here. For more information about the Source is: setting, see the
Source Is
section of this chapter.
ENWW Paper/Quality tab features 127
HP JetReady 4.2 host-
based driver for Windows
To Next Page
Loading...