The Type is: drop-down menu shows all of the media types that the printer supports. For more
information about the Type is: drop-down menu settings, see the description for Type is: in the
Type
is section of this chapter.
NOTE You must use the same size of media for the entire print job. All Use Different Paper/
Covers options use the last Size is: setting that you select in any one of the Use Different Paper/
Covers options.
When you change the type and source of the media and covers, the settings that you select
remain configured until you close the software program.
Last Page
Use the Last Page options to select an alternative media size, type, or source for the last page of a
document. The following figure shows the appearance of the Paper Options group box when you select
the Use Different Paper/Covers check box.
Figure 4-9 Last Page options
The following are the Last Page options:
●
Size is: drop-down menu
●
Source is: drop-down menu
●
Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes made to the Size
is: setting here override any previous Size is: settings in other Use Different Paper/Covers options.
The Type is: drop-down menu shows all of the media types that the printer supports. For more
information about the Type is: drop-down menu settings, see the description for Type is: in the
Type
is section of this chapter.
128 Chapter 4 HP JetReady 4.2 host-based driver for Windows ENWW
HP JetReady 4.2 host-
based driver for Windows
To Next Page
Loading...