Setting up a printer with Mac OS X V10.3
1. In the Applications folder, open the Utilities folder, and then run the Printer Setup Utility.
2. Click Add Printer (in Mac OS X V10.1), or click Add (Mac OS X V10.2), or click Printers and then
click Add Printer (Mac OS X V10.2.8 or later).
3. When the New Printer drivers detected popup box appears, click OK.
4. From the top pop-up menu, select the appropriate connection type for your product.
5. Select or type in any other information as indicated for the type of connection for your product. For
example, if you are using an AppleTalk connection, select your product zone; or if you are using
IP Printing, type an IP address in the Printer Address field. In the Printer Model drop-down menu,
select HP. In the Model Name drop-down menu, select HP Color LaserJet 3600.
NOTE If the automatic selection fails, or if you want to manually select a .PPD file, click
the Printer Model pop-up menu, select HP, and then select the .PPD file that you want to
add.
6. Click Add. The HP Color LaserJet 3600 appears in the Printer List.
7. To configure installable options in Mac OS X V10.2 and later, such as a duplexing unit or optional
paper trays, click Show Info? and select Installable Options in the drop-down menu.
NOTE This step is necessary only for network connections and USB connections using
Rendezvous/Bonjour. AppleTalk automatically configures the installable options.
8. Configure the options, click Apply Changes, and then close the Printer List dialog box.
208 Chapter 6 Installation for Macintosh operating systems ENWW
Installation in Macintosh
To Next Page
Loading...