HP Laserjet,Color Laserjet 3600 - Page 80

Figure 2-32 Replace Supplies screen
The settings on this screen prompt the printer to stop printing at a certain threshold (number of pages
in the media tray). By default, the Stop At Supply Out setting is selected.
To prompt the printer to stop printing at a higher threshold, select Stop at Supply Low and type a value
in the Low Threshold (0–100) field. When the number of sheets in the media tray reaches this value,
the printer stops printing.
You can also prompt the printer's behavior when the color print cartridges run out. By default, the
Continue Printing in Black-Only Mode is selected. To prompt the printer to stop instead of continuing
to print using the black cartridge, select Stop.
Click Apply Now to save new settings.
Additional Settings
Select Additional Settings to gain access to the HP EWS.
62 Chapter 2 Software description ENWW
Software description