HP Laserjet,Color Laserjet 3800 - Page 112

Select one of the following options in the Configuration drop-down menu:
●
DHCP
●
BootP
●
Manual
You can also use this screen to modify the following settings:
●
Host Name
●
IP Address
●
Subnet Mask
●
Default Gateway
To save new settings, click Apply Now.
To view and change other network settings, click Additional Network Settings.
If a user name and password have been set, you might need to obtain them from your IT administrator.
For more information, see the HP Embedded Web Server User Guide.
The HP EWS opens to the Network Settings screen. For information about this screen, see
Networking
tab in this STR.
Rendezvous Setting
Select Rendezvous Setting to open the Rendezvous Setting screen. Rendezvous is enabled by
default.
To disable Rendezvous, click to clear the Enable Rendezvous check box and then click Apply Now.
Figure 2-48 Rendezvous screen
88 Chapter 2 Software description ENWW