To prompt the printer to stop printing at a different threshold, select Stop at Supply Low and type a
value in the Low Threshold (0-100) field. When the number of sheets in the tray reaches this value,
the printer stops printing.
You can also specify the printer behavior when the color print cartridges run out. By default, the
Continue Printing in Black-Only Mode is selected. To prompt the printer to stop instead of continuing
to print using the black cartridge, select Stop.
Click Apply Now to save the new settings.
Restrict Color
Click Restrict Color in the Configuration Settings menu to open the Restrict Color Use screen.
Figure 2-50 Restrict Color Use screen
On the Restrict Color Use tab, select one of the following options:
●
Enable Color. Select this option to print all print jobs in color.
●
Color If Allowed (selected by default). Select this option to allow the user and the software program
control over whether print jobs are printed in color.
●
Disable Color. Select this option to print only in black.
Click Apply Now to save new settings.
To restrict color by user, click the User tab.
90 Chapter 2 Software description ENWW
To Next Page
Loading...