Dynamic measurement units
Use the dynamic measurement units button to toggle the unit of measurement between standard
(inches) and metric (millimeters) units of measurement. The label on this button is dynamic, depending
on the measurement units that are in use. If the custom size currently shows the measurements in
inches, the button is labeled Use Millimeters. If the custom size currently shows the measurements in
millimeters, the button is labeled Use Inches. Click the button to switch measurement-unit types.
Close
When you click the Close button, the Custom Paper Size dialog box closes according to the logic in
the following table. In all cases, any custom media sizes that are successfully saved (and not renamed
or deleted) while the dialog box is open remains in the Size is: drop-down menu on the Paper tab. The
following table lists options that appear when you click the Close button.
Table 3-6 Close dialog-box text strings
If the drop-down menu contains And the button says Then this happens when you click the
Close button
Untitled Save The dialog box closes, but you lose the
changes that were not saved.
The current media size remains the
same as it was when you clicked the
Custom button.
<user-typed text> Save The dialog box closes, but you lose the
changes that were not saved.
The current media size remains the
same as it was when you clicked the
Custom button.
<name of saved item> Delete The dialog box closes, and the current
media size is set to the size that last
appeared in the drop-down menu.
<user-typed text> Rename The dialog box closes, but you lose the
changes that were not saved.
The current media size remains the
same as it was when you clicked the
Custom button.
Source is
The Source is: setting specifies the source tray to use for printing a document. The list of source trays
depends on the product accessories that are installed. Any optional source trays that are installed
through the Configure tab also appear here.
The Source is: drop-down menu can contain the following options, depending on what has been
installed on the product:
●
Automatically select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
130 Chapter 3 HP traditional print drivers for Windows ENWW
To Next Page
Loading...