●
Tray 2 (250-sheet tray)
●
Tray 3 (500-sheet tray)
The default setting is Automatically Select. When this setting is selected, the HP Color LaserJet 3800
uses the source tray that supports the media size that you have selected. If you select a source tray
other than Automatically select, make sure that the correct media size is loaded in the source tray.
For more information about media sources, see the
Media attributes section of this STR.
Type is
The Type is: drop-down menu shows all of the media types that the HP Color LaserJet 3800 supports.
When you use the default setting, Unspecified, the printer uses the default media type, which is usually
Plain.
The following standard types appear in the list:
●
Unspecified
●
Plain
●
Preprinted
●
Letterhead
●
Transparency
●
Prepunched
●
Labels
●
Bond
●
Recycled
●
Color
●
Cardstock 164-220 g/m2 (45–60.3 lb)
●
Rough
●
Heavy 105-120 g/m2 (28.8–32.9 lb)
●
Envelope
●
Light 60-75 g/m2 (16.4–20.5 lb)
●
Intermediate 90-104 g/m2 (24.7–28.5 lb)
●
Extra Heavy 120-163 g/m2 (32.9–44.7 lb)
●
Glossy 106-120 g/m2 (29.1–32.9 lb)
●
Tough Paper (Glossy Film)
The default setting is Unspecified, and the program selects the media type. If you select a different
setting, make sure that the correct media type is loaded in the tray that you selected in the Source is:
setting.
When you change the print-driver setting to a media type that is not currently loaded in the product, a
control-panel message appears that prompts you to load the media type or select another tray.
ENWW Paper tab features 131
HP traditional print
drivers for Windows
To Next Page
Loading...