Configure tab features
To gain access to the Configure tab in Windows 98 or Windows Me, follow these steps:
1. Click Start.
2. Select Settings.
3. Click Printers.
4. Right-click the product name.
5. Click Properties.
6. Click the Configure tab.
Use the Configure tab to tell the driver about the product hardware configuration. If bidirectional
communication is enabled in a supported environment, set up this tab by clicking Update Now. If your
environment does not support bidirectional communication, the Update Now button is unavailable, so
you must manually configure the options on this tab.
The Configure tab is available when the driver is opened from the Printers folder by clicking
Properties. When you open the driver from within a program, the Configure tab is not visible (with a
few exceptions, such as when using Excel 5.0 or Corel® Chart 4.0). When opened from the Printers
folder, the Configure tab looks like the following figure.
Figure 3-25 Configure tab
The Configure tab contains the following controls:
ENWW Configure tab features 157
HP traditional print
drivers for Windows
To Next Page
Loading...