HP Laserjet,Color Laserjet 3800 - Page 239

Units
To change measurement units, click one of the options in the Units group box (either Inches or
Millimeters).
Custom width and height control limits
The minimum media size for the HP Color LaserJet 3800 printer is 76.2 x 127 mm (3 x 5 inches) and
the maximum is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes media size limits
for each media-handling device.
Table 4-2 PCL 6 custom media sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 76.2 mm (3.0 inches) 215 mm (8.5 inches)
Height 127.0 mm (5.0 inches) 355.6 mm (14.0 inches)
Tray 2 (250-sheet) Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.26 inches) 355.6 mm (14.0 inches)
Tray 3 (500-sheet) Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.26 inches) 355.6 mm (14.0 inches)
Duplexing unit Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.26 inches) 355.6 mm (14.0 inches)
Source is
The Source is: setting specifies the source tray to use for printing a document. The list of source trays
depends on the product accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
The Source is: drop-down menu can contain the following options, depending on what has been
installed on the product:
●
Automatically select
●
Printer Auto Select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
●
Tray 2 (250-sheet tray)
●
Tray 3 (500-sheet tray)
The default setting is Automatically Select. When this setting is selected, the HP Color LaserJet 3800
uses the source tray that supports the media size that you have selected. If you select a source tray
other than Automatically select, make sure that the correct media size is loaded in the source tray.
For information about media sources, see the
Media attributes section of this STR.
ENWW Paper/Quality tab features 215
HP unidrivers for
Windows