NOTE The location for the installer package defaults to c:\<name of printer>.
NOTE During installation, several files, including system files, are placed at the root of the
directory that appears in the Location field. Be sure that enough space is available on the
directory before continuing.
Click Printer Properties to open the Printer Properties dialog box. This dialog box has two tabs:
●
General
●
Sharing
Figure 5-49 Printer Properties General tab
On the General tab, you can change the printer name by typing a new name in the Printer Name: field.
Use the Location: and Comment: fields to describe the printer. You can also leave these fields blank.
If you want to use the HP Color LaserJet 3800 printer as your default printer, select the Use the printer
as the default printer for Windows-based programs check box.
Click OK to return to the Ready to Create Installer dialog box, or click the Sharing tab to share the
printer over a network.
The Sharing tab is shown in the following figure.
308 Chapter 5 Installing Windows printing-system components ENWW
To Next Page
Loading...