5. Remove the new image drum from its protective bag.
NOTE: Store protective bag in a secure place for future use.
NOTE: Do not shake the image drum.
CAUTION: Do not touch the green cylinder on the bottom of the image drum because it can
damage the drum.
6. Align the image drum with the correct slot and insert the image drum until it clicks into place. The
gray protective cover on the bottom of the drum automatically slides off as the image drum is
inserted. You can discard this cover.
7. Insert additional image drums in the same manner.
8. Grasp the grips on the sides of the front door and lift up to close.
200 Chapter 14 Manage and maintain the product ENWW
To Next Page
Loading...
