7. Push the staple carriage back into the booklet maker.
8. Close the front door of the booklet maker.
Jam recovery
This product provides jam recovery, a feature that reprints jammed pages. The following options are
available:
●
Auto — The product attempts to reprint jammed pages when sufficient memory is available.
●
Off — The product does not attempt to reprint jammed pages. Because no memory is used to store
the most recent pages, performance is optimal.
NOTE: When using this option, if the product runs out of paper and the job is being printed on
both sides, some pages can be lost.
●
On — The product always reprints jammed pages. Additional memory is allocated to store the last
few pages printed. This might cause overall performance to suffer.
Set the jam recovery feature
1. Touch Administration and then touch Device Behavior.
2. Touch Warning/Error Behavior and then touch Jam Recovery.
3. Touch an option and then touch Save.
ENWW Jams 257
To Next Page
Loading...
