Menu item Sub-menu item Sub-menu item Values Description
color is the source of a problem. In this mode,
all consumable-related errors are ignored.
Paper Path Sensors Initiate a test of the paper-path sensors.
Paper Path Test Test Page Print Generate a test page for testing the paper-
handling features. Define the path for the test
in order to test specific paper paths.
Source All trays
Tray 1
Tray 2
(Additional trays are
shown, if applicable.)
Specify whether the test page is printed from
all trays or from a specific tray.
Destination All bins Select the output option for the test page.
Send the test page to all output bins or only
to a specific bin.
Duplex Off (default)
On
Select whether the duplexer should be
included in the test.
Copies Range: 1-500,
Default is 1.
Select how many pages should be sent from
the specified source as part of the test.
Table 2-17 Troubleshooting menu (continued)
54 Chapter 2 Control panel ENWW
To Next Page
Loading...
