Menu item Sub-menu item Sub-menu item Values Description
Booklet Maker Media Size Letter
Legal
A4
Executive (JIS)
8.5 x 13
Select the options that you want to use to test
the booklet maker.
Media Type Select from a list of
bins.
Select the type of media to use for the
Finishing Paper Path Test.
Copies 1
10
50
100
500
Select the number of copies to include in the
Finishing Paper Path Test.
Duplex Off
On
Select whether to use the duplexer in the
Finishing Paper Path Test.
Test Page Print Print a test page to use for the test.
Manual Sensor Test This item performs tests to determine
whether the paper-path sensors are
operating correctly.
Component Test Transfer Motors
Belt Only
Image Drum Motors
Black Laser Scanner
Cyan Laser Scanner
Magenta Laser
Scanner
Yellow Laser
Scanner
Fuser Motor
Fuser Pressure
Release Motor
Black Alienation
Motor
Cyan Alienation
Motor
Magenta Alienation
Motor
Yellow Alienation
Motor
Exercise individual parts independently to
isolate noise, leaking, or other issues. To start
the test, select one of the components. The
test runs the number of times specified in the
Repeat option. You might be prompted to
remove parts from the device during the test.
Press the Stop button to abort the test.
Table 2-17 Troubleshooting menu (continued)
56 Chapter 2 Control panel ENWW
To Next Page
Loading...
