5. Load the media into the tray. If this is special paper such as letterhead, load it face-up with the top
edge toward the front of the tray.
NOTE: If you are duplex printing, see Print on both sides of the paper (duplex printing)
on page 97 for loading instructions.
6. Make sure that the stack of media is flat and that the media is below the height tabs.
7. Slide the tray back into the printer.
Load tray 3
Optional tray 3 holds up to 500 sheets of standard paper and adjusts for many sizes. Tray 3 is installed
underneath tray 2. When tray 3 is installed, the printer detects it and lists tray 3 as a choice in the control
panel CONFIGURE DEVICE menu.
ENWW Load media 71
To Next Page
Loading...
