2. On the control panel, press the Setup button.
3. Use the arrow buttons to select the Fax
functions menu, and then press the OK
button.
4. Use the arrow buttons to select the Send fax
later menu, and then press the OK button.
5. Use the keypad to enter the time.
6. If the product is set to the 12-hour time mode,
use the arrow buttons to move the cursor past
the fourth character to set A.M. or P.M. Select
1 for A.M. or select 2 for P.M., and then press
the OK button. If the product is set to the 24-
hour time mode, press the OK button.
7. Press the OK button to accept the default date
or use the keypad to enter the date, and then
press the OK button.
8. Enter the fax number.
NOTE: This feature does not support
undefined (ad hoc) groups.
9. Press the OK button or the Send Fax
button. The product scans the document into
memory and sends it at the designated time.
Use access codes, credit cards, or calling cards
To use access codes, credit cards, or calling cards, dial manually to allow for pauses and dialing codes.
Send faxes internationally
To send a fax to an international destination, dial manually to allow for pauses and international dialing
codes.
ENWW Use fax 123
To Next Page
Loading...