Review the information in the dialog box and click OK to be taken to the Reboot dialog box (Step 22).
Figure 3-22 Driver Installation — Reboot screen
STEP 22
Yes allows the printer to shut down and restart in order to complete the software installation.
No exits the software installation wizard without restarting the computer.
NOTE: It is necessary to reboot the computer when prompted in order for the software to install
properly.
Installing the software when the printer is already connected to a
computer
If the product is already connected to a computer when you begin installing the software, Windows
automatically detects the product and uses Plug-n-Play to install the printer driver. During this process,
Plug-n-Play calls the Add Printer Wizard to automatically install the printer driver and the USB port.
When Plug-n-Play completes, you are given the option to install the additional support files.
If you prefer, you can cancel Plug-n-Play and run the Add Printer Wizard manually to install the printer
driver.
At the end of the Add Printer Wizard, you are given the option to install the additional support files.
52 Chapter 3 Install Windows printing-system components ENWW
To Next Page
Loading...