Paper Handling menu
Use this menu to set the paper size and type for each tray. The product uses this information to produce
pages with best possible print quality. For more information, see
Configure trays on page 85.
Some items on this menu are also available in the software program or the printer driver. Program and
printer-driver settings override control-panel settings.
Item Values Explanation
ENVELOPE FEEDER SIZE List of available paper sizes for
the envelope feeder
Use this item to set the value to correspond with the paper size that is
currently loaded in the envelope feeder.
ENVELOPE FEEDER TYPE List of available paper types
for the envelope feeder
Use this item to set the value to correspond with the type of paper that
is currently loaded in the envelope feeder.
TRAY1 SIZE List of available paper sizes for
Tray 1
Use this item to set the value to correspond with the paper size that is
currently loaded in Tray 1. The default setting is ANY SIZE.
ANY SIZE: If both the type and size for Tray 1 are set to ANY, the
product will pull paper from Tray 1 first if paper is loaded in the tray.
A size other than ANY SIZE: The product does not pull from this tray
unless the type or size of the print job matches the type and size that
is loaded in this tray.
TRAY1 TYPE List of available paper types
for Tray 1
Use this item to set the value to correspond with the type of paper that
is currently loaded in Tray 1. The default setting is ANY TYPE.
ANY TYPE: If both the type and size for Tray 1 are set to ANY, the
product will pull paper from Tray 1 first if the paper is loaded in the tray.
A type other than ANY TYPE: The product does not pull from this tray.
TRAY[N] SIZE List of available paper sizes for
Tray 2 or the optional trays
The tray automatically detects the paper size based on the position of
the guides in the tray. The default setting is either LTR (letter) for 110 V
engines or A4 for 220 V engines.
TRAY[N] TYPE List of available paper types
for Tray 2 or the optional trays
Sets the value to correspond with the paper type that is currently
loaded in Tray 2 or the optional trays. The default setting is ANY
TYPE.
18 Chapter 2 Control panel ENWW
To Next Page
Loading...