3. Pinch the release that is located on the rear paper guide and slide it to the correct paper size.
5A
5B
SI
J
C
E
X
E
R
TL
4A
4. Load the paper into the tray. Make sure that the stack is flat at all four corners and that the top of
the stack is below the maximum-height indicators.
NOTE: For information about loading paper that requires a specific orientation, see Paper
orientation for loading trays on page 78.
5. Slide the tray completely into the product.
82 Chapter 6 Paper and print media ENWW
To Next Page
Loading...